Guido@SPS wrote: ↑

1.11.19. 12:53

How much is the fish?

You can buy the whole car for 34.500€.

https://suchen.mobile.de/fahrzeuge/deta ... d74c7f01f9

Guido@SPS wrote: ↑

26.11.19. 13:15

You can buy the whole car for 34.500€.

Now why did you have to do a thing like that...? Now I have to decide which one of my kidneys I don't need

Here we have one of a rarer conversion, a rotrex C15-60 supercharger. The 1.8L BP engine produces 200 hp with 242 Nm/178 lbft torque. It also has a Stoptech Big Brake Kit, some 15" Rota Grid wheels with Federal 595 RS-R tires in 205/50 ZR15, a SPS "Extreme" rollbar, a race header, a mishimoto radiator and our coilover setup.
Best regards
Guido from SPS

Here You can see a really serious project.

This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque.
It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system.
Best regards
Guido from SPS

Hello guys,

the first post in 2020, this time something special.

We also restore complete cars. The customer made the decision to restore his car completely from zero to the top.
It gets a new painting, new seals, new gaskets, new rubbers, a new windshield, a rollbar, Lotus Elise seats, a turboconversion (Borg Warner EFR 6758), a SPS coilover setup, and some nice wheels and tires.

We are filming the whole process and creating a time lapse video.
Best regards
Guido from SPS

Some progress is going on.
Best regards
Guido from SPS

Some days ago we had a really nice looking ND here. We mounted Rota Kyusha 9x17" with 20mm offset on Hankook Ventus V12 215/40 ZR17. The suspension is our SPS "Super Low" coilover setup. The last step was mounting an ATH exhaust.
Best regards
Guido from SPS

Here we have a new ND completely customized and wrapped in british racing green. The customer bought the new car from our Mazda dealer partner and we customized it.

Specs:
2020 MX-5 ND 184hp
SPS street coilover setup
Rays TE37 8x16" 25mm offset on 205/50 R15 Federal 595 RS-R
Stoptech Big Brake Kit
Recaro Pole Position
Customized steering wheel
Full exhaust with racing header and HJS 200 cells catalytic converter
wrapped in british racing green
Best regards
Guido from SPS

Wow, great way to start life for this lucky ND

And again a really nice ND. This time we installed BBR GTi camshafts with a full exhaust system and tuned the ECU on the dyno. Now car the has 200hp at the flywheel instead of 160hp.
The car also got some nice 17" Rotas, our SPS street coilover setup and Recaro pole position in full leather.
Best regards
Guido from SPS

Guido@SPS wrote: ↑

2.03.20. 17:55

car has 200hp at the flywheel instead of 160hp.

is it anything notable quicker?

Yes, You feel the acceleration. Also the rev limiter is higher, 7500rpm.

Guido@SPS wrote: ↑

29.02.20. 17:44

Here we have a new ND completely customized and wrapped in british racing green. The customer bought the new car from our Mazda dealer partner and we customized it.

Specs:
2020 MX-5 ND 184hp
SPS street coilover setup
Rays TE37 8x16" 25mm offset on 205/50 R15 Federal 595 RS-R
Stoptech Big Brake Kit
Recaro Pole Position
Customized steering wheel
Full exhaust with racing header and HJS 200 cells catalytic converter
wrapped in british racing green

I think I have this one saved on my mobile.de profile
https://mobile.de/25HB2H

Sasa